Universal laser cut 36-1 trigger wheel

£12.00  ex. VAT (GBP)
If you're using one of our ECUs with an older engine that doesn't have a crank sensor installed from the factory, the chances are that you'll need one of our universal trigger wheels.

These wheels are 36-1 pattern, compatible with most aftermarket ECUs. Cut from 5mm steel with a 12.5mm central pilot hole.

We have a range of sizes available, including 135mm, 145mm, 155mm and 175mm. These measurements are outside diameters. The teeth are approximately 5mm in height and should sit proud of the crankshaft pulley. So if you have a 125mm crank pulley (roughly Cosworth YB size) you'd go for the 135mm trigger wheel.

Add to Cart:

Please Choose:


Registered Office:
43 Oswald Road
North Lincolnshire
DN15 7PN

Telephone: 01724 700222
Email: sales@canems.co.uk

VAT Reg No. 170061643
Registered in England No. 08598238